How To DIY A Vertical Garden

Step One: Cut your boards to size

Step Two: Mark Where Your Holes For The Pots Will Go

Step Three: Drill Holes In The Center Of Where Each Pot Will Go

Step Four: Cut Out Your Holes For Each Of Your Pots

Step Five: Sand Down The Edges Of Each Hole

Step Six: Measure Out An Inch From Each Corner For The Holes Where The Rope Will Go

Step Seven: Drill Out The Holes For The Rope

TIP: Wrap The Ends of The Rope In Black Tape To Make Sliding It Through The Wood Easier

Step Eight: Cut Four Strands of Rope and Attach A Copper

This project was made in collaboration with Cole’s Woodworks and Mackenzie Childs.